The extractor hood is an essential component in every kitchen. It serves the purpose of eliminating odors, steam, and fumes that arise during cooking. However, due to its location directly above the cooking plates, it tends to accumulate grease and dirt. Therefore, it is highly important to clean and degrease your extractor hood regularly in order to maintain its functionality and extend its lifespan.
Why is Regular Cleaning Important?
Prior to delving into the tips for cleaning your extractor hood, it is crucial to understand the significance of regular cleaning. The extractor hood is consistently exposed to cooking fumes, grease splatters, and dust. If it is not cleaned on a regular basis, these residues will accumulate and clog the filters and ventilation ducts, resulting in a reduction in suction efficiency and potential safety hazards such as the risk of fire. Additionally, a dirty extractor hood can emit unpleasant odors and make your kitchen less enjoyable to use. Therefore, regular cleaning is necessary to ensure proper functioning and maintain a healthy environment in your kitchen.
Tips for Degreasing Stainless Steel Extractor Hood Filters
The filters of your extractor hood are the parts that are most likely to become dirty quickly. As they come into direct contact with cooking fumes and grease splatters, they easily accumulate grease and dirt. Here are some simple tips to effectively degrease the filters:
Using Baking Soda and White Vinegar
Baking soda and white vinegar are natural products that can be used to degrease the filters of your extractor hood. Follow these steps:
1. Remove the filters from your extractor hood, referring to the user manual if needed.2. Create a solution by mixing two tablespoons of baking soda with a cup of white vinegar.3. Soak the filters in the solution for approximately an hour.4. Gently scrub the filters with a sponge to remove grease residue.5. Rinse the filters with hot water and allow them to dry completely before reinstalling them.
Using Black Soap
Black soap is an excellent natural degreaser that can be used to clean the filters of your extractor hood. Follow these steps:
1. Remove the filters from your stainless steel extractor hood.2. Dilute liquid black soap in hot water.3. Scrub the filters with a sponge soaked in the black soap solution.4. Rinse the filters with hot water and allow them to dry completely before reinstalling them.
Using Steam to Clean Your Extractor Hood
Steam is an excellent method for deep cleaning your extractor hood, as the heat and moisture easily loosen grease and dirt residues. Follow these steps:
1. Remove the filters from your extractor hood.2. Use a handheld steam cleaner to release steam along the walls of the hood.3. The steam will naturally loosen grease residues.4. Use a sponge to remove the grease residues loosened by the steam.5. Finish the cleaning process by wiping with a dry and soft cloth.
